| Recording method | 
3-color exposure with OLED | 
| Film used | 
 FUJIFILM instax WIDE Instant Film (sold separately) 
 | 
| Number of films | 
10 films/pack | 
| Image size | 
62mm×99mm | 
| Supported image size | 
 800 × 1260 dot 
 | 
| Printing resolution | 
 12.5 dots/mm (318 dpi, 80 μm dot pitch) 
 | 
| Printing levels | 
 256 levels per color (RGB) 
 | 
| Interface | 
Standard compliance: Bluetooth Ver. 4.2 (BLE) | 
| Supported image format | 
JPEG, PNG, HEIF, DNG | 
| Printing time | 
Image recording - photo output (fed out): Approximately 12 sec. | 
| Approximate printing capacity | 
Approximately 100 prints (from full charge) *The number of prints depends on the usage conditions. | 
| Power supply | 
Lithium ion battery (internal type: not removable) | 
| Charging time | 
Approximately 80 to 120 minutes (Charging time depends on the temperature and battery remaining level) | 
| Power consumption | 
Approximately 3 W | 
| Operating environment | 
Temperature: +5 oC to +40 oC Humidity: 20% to 80% (no condensation) | 
| Main unit dimensions | 
139mm×127.5mm×33.7mm(excluding projecting parts) | 
| Main unit mass | 
Approximately 340 g (excluding film pack) | 
| Supplied accessory | 
USB cable (BOD700-101, Length: 30 cm) Stand (1) Strap (1) |